Best 3D Printer For RC Parts

Best 3D Printer For RC Parts

RC models are the Radio-Control or Remote-Control models. You must have played with some of them in your childhood. There are RC cars, RC trucks, RC helicopters, RC transformers, RC boats, RC puppets, and many more. The standard and older methods made a huge success, but they are out of trend and now they are being replaced with the emergence of 3D printing. Let’s understand this in detail.

Why is 3D Printing so Good for RC?

The main reason is that the 3D-printed RC models cost cheaper than the normal ones. Also, you can print it your way, fully personalized. If you don’t like a part, change it. Design something unique, or something weird if you want, or even an RC car you saw in a movie or anime. The design will be done using CAD or other software, which we’ll discuss later in the article.

Another advantage of 3D printing for RC parts is, that people sometimes lose a part of their RC model, for instance, be it an RC car part, which is nowhere to be found, or even break one by mistake. Buying just that small piece again will cost very high comparably and finding used RC parts is hard. But with 3D printing RC car parts, you can get that part again in a few minutes and get back to playing with your favorite toy.  A great option, isn’t it? No tension of spare parts, you can just 3d print RC parts.

Now the question is, which are the best printers to print the 3D printed RC parts. I got you these 3 printers for the same. Let’s have a look.

List Of Best RC Parts 3D Printer

Check Price On Amazon Check Price On Amazon Check Price On Amazon

Best 3D Printer for RC Parts

1. ELEGOO Resin Mars 2 Pro Mono MSLA 3D Printer

ELEGOO Resin Mars 2

Check Price On Amazon

How does this sound “Fast printing and less maintenance?” Are you intrigued? Then you must check out the Elegoo Resin 3D printer.

This 3D printer for RC parts has so many features. However, you will find the important ones highlighted here.

So what makes it easy to use and 3D print your RC part? Well, this is a resin printer, and it’s covered with a silicone rubber seal that keeps the odor inside.

Also, its 6.08-inch monochrome LCD with 2K HD resolution makes 3D printing pretty easy. It takes only 2 seconds to print and cure per layer of resin. So this is why it’s called fast printing.

Like its previous version, this printer also comes with a built-in active carbon that absorbs all the annoying fume of resin. So you barely smell any irritant odor while printing the RC parts. This mono LCD has also offered a longer lifespan and stable performance for a long time, thus saving some bucks.

As it has a multi-user interface supporting 13 different languages, it can easily facilitate worldwide users.

Its COB UV LED light source also offers excellent heat dissipation performance, a high luminous maintenance rate, and much more. These features ensure that each of your printing experiences comes out perfectly.

Chitubox slicing software is another great addition to this 3D printer as it works wonders for SLA, DLP and LCD resin-based 3D printers.

Its CNC machined aluminum body makes it a formidable machine. Also, its sandblasted build plate is strong and offers consistent printing. So these are some of the features that made this 3D printer into this list. If you find it relevant, give it a shot.

2. Official Creality Ender 3 V2 3D Printer

Official Creality Ender 3

Check Price On Amazon

Resume printing function, silent motherboard, and affordable price are the three factors that have made this printer recommended for printing 3D RC parts. This has a carborundum glass platform which means the hotbed can get heated quickly, and thus there is a reduced warping problem.

Upon receiving the 3D printer, it needs a bit of assembly. No worries, there is nothing too complicated. Just follow the manual and some youtube videos for reference. Once the setup is done, run a small trial. For this, print an example that comes with the SD card and gives your printer a test run.

3D printing makes much noise while printing is a wide saying. But not really with this printer because it comes equipped with a self-developed motherboard that ensures smooth movement under 50db.

So you can print your favorite RC parts without disturbing others.

Also, the V-guide rail pulley promises low noise, wear resistance, stable movement, and, lastly, longer life. Now tell me what else you need in a 3D printer.

Since it has a rotary know on its extruder, the printer makes it easy to load and feed filament. You can adjust the belt tension quickly, thanks to the XY-axis tensioner that makes this possible.

And what enhances the user experience is the 4.3inch color screen that comes with a simple design and is quick to operate. A toolbox, a smart add-on makes it more convenient and quicker to organize your tools and storage.



Check Price On Amazon

Anycubic is well-known for 3D printer accessories. Recently, it launched some printers itself, the Mega series. Let’s take a look at the Mega-X in depth.

Mega-X gives you a building area of 11.81 x 11.81 x 12 inches, which is quite bigger than the normal ones so you get more space for bigger ideas. The power supply is backed by Meanwell Compliance, ensuring safety and resume print function for power outbreaks.

The device offers very high precision with the help of a Rigid metal frame, upgraded Y-Axis Dual Sideways Design, and Z-Axis Dual Screw Rod Design. The heat bed is coated with a microporous coating, which helps in stronghold while printing and removing the model after printing when cooled. So 3D printing big RC car parts would be quite easy.

The special leveling knob is made large to go with easy leveling. Also, the TFT touch screen for operation makes the use of the printer much easier.

You get all the tools and accessories in the packing list and a PLA filament for testing too. The assembling is simple, and you got to fix 12 screws, 3 cables, start the installation and begin printing. Highly recommended!

4. ANYCUBIC Mega Pro 3D Printer

3d printed RC parts

Check Price On Amazon

This printer by Anycubic provides 2 in 1 service. It does Laser Engraving along with 3D printing. You can easily switch between the two. It gives us a printing area of 8.27 x 8.27 x 8.07 inches and an engraving size of 8.67 x 5.5 inches.

Talking about the printing features. the device is equipped with the smart pause and resumes print function, allowing you to do multi-color printing with increased efficiency. The motherboard comes with a TMC2022 driver ensuring noise-free printing.

Additionally, you get smart auxiliary leveling and fixed-point detection. The print head moves to the corner, checks for the leveling nut’s grip, make feedback, and lowers printing failure risk.

The printer maintains stability with the help of a rigid metal frame and modular design. The double gear extrusion facilitates the filament TPU, which is quite flexible and good for the RC parts. It will be good to increase the leveling knob area for better output.

So overall, if you have noticed this 3D printer has some advanced features and can easily support printing different RC parts. if in case, you want to print an RC car, you can easily print any car parts like RC wheels, suspension, springs,  and even the Chassis. Also, you can engrave the parts as per your choice after printing.

5. TRONXY 3D Printer XY-2 PRO

Check Price On Amazon

This open and upgraded printer by Tronxy is very suitable for beginners. It offers a print area of 10 x 10 x 10.2 inches and supports the filaments PLA, ABS, and PETG. This 3D printer helps you with all the latest features.

The main features include automatic leveling, which evens the hotbed and has sensors for filament runout detection, and power issues. The resume print function resumes printing without delay to avoid waste of time.

For the interface, you get a 3.5-inch full-color HD touch-screen display. You also have manual adjustment nuts to prevent pulley wear. Not only this, the extruder is equipped with double fans for a better cooling effect. It is important because heating is quick, and that said, it just takes 5 min for the hotbed to reach 110°C. Moreover, the printing is ultra silent.

This open and upgraded printer by Tronxy is very suitable for beginners. It offers a print area of 10 x 10 x 10.2 inches and supports the filaments PLA, ABS, and PETG. This product helps you with all the latest features.

I find the price very reasonable too. With the printer in the package, you’ll get a sticker, reader with 8G TF card, 0.25Kg PLA filament for testing, and the tools ( USB, Manual, Shovel ). The technical support is for a lifetime and very satisfactory. So for all the above-mentioned reasons, we find this printer an interesting one and recommend you to grab it.

How To Get Started in 3D Printing RC Parts?

The CAD model

An important part of printing RC parts is the design. This is done using Computer-Aided Design, the CAD software you must have heard of. The 3D printer can’t print anything you think or say, and you must design your model and hand the file input to the printer.

Various CAD softwares help you design your 3D model. However, you can get pre-made models online, but you’ll need to get familiar with CAD for the personalized work. So the first thing you have to do is design.

Inventiveness and use of the advanced technology-the perfect interplay

Inventions assist the adaptation of humans in the world. Technology has become advanced and is taking over the traditional methods quickly. Challenges come along the way but so do various inventions too. Relating it, the 3D printer is a recent and very advanced technology, which helps you create and invent anything of your wish.

The ideas and will to create something useful mixed with advanced technology presents you with a wonderful gift. The ‘Vulcan Pavilion’ at Beijing is the record-holding world’s largest 3D printed structure. There are many other world records too and you can also make them.

Transfer your finished CAD designs to the printer system

After you decide and make the design, you must ensure that the file saved is proper. The formats include ‘Obj’ or ‘Stl’ extensions. For the transfer of the design to the printer, there can be several ways. These include connecting your printer with pc and direct transfer. You can use an SD card or pen drive to insert in the USB connection.

Also, some printers offer Wifi and direct wireless transfer of the file to be printed. Most printers give you an SD card along with the printer, so it’s not an issue. Check the user manual, and you’ll get what options your printer supports. Transfer and start printing.

Checking the printed parts

The printing can take time, depending on the complexity and speed of the printer. When finished, you must let the models cool down, remove them from the model with the help of a shovel if needed. It is important to be careful, and you don’t want to ruin your excitement and print again.

If you print RC parts, and check them thoroughly for their finishing, you have to assemble them; they are interdependent. For check, if you print a tire, it should be smoothly rotating on the ground. If encountered minor flaws, anything could be the reason; try fixing it with the available materials. If you can’t find a solution or there’s some major flaw, check the reason, and you will have to print again.

The assembly

This will be the most fun part, actually making the RC model you worked so much for. Gather all the parts. It would help if you had decided the assembling pattern while making the design, do it slowly and the same way you decided. It is better to have nuts or fitting-type parts rather than using an adhesive. The assembly might take you time, but when you finish, the feel of creating your RC model is just fabulous. All the best!


1. What are the specific advantages of 3D printing in the field of remote-controlled models?

The main advantage of using a 3D printer to make RC parts is the ability to create complex, customized parts quickly and easily. 3D printing also offers the ability to create prototypes and test new designs quickly, allowing for iterative improvements to be made until the perfect design is achieved. In addition, 3D printing offers a more cost-effective and time-efficient solution compared to traditional manufacturing methods.

2. Do I need training for 3D printing functional model building?

There is no exact training you need for 3D printing. There are some basic skills which you must know, such as designing, assembling, and leveling. They are quite easy; you may learn them by doing (you can watch youtube videos) or looking at a mini online course.

3. Can you make RC car parts with a 3D printer?

Yes, 3D printers can be used to make RC parts. 3D printing technology allows for the creation of complex, detailed parts that can be customized to meet specific requirements. This makes it a suitable option for creating high-quality, functional RC parts.

4. Is there a market for 3D printed parts?

Yes, there is. There is a huge sale of 3D printed parts and accessories currently in the world. Many businesses ask for the details, print your product or parts and deliver it to your doorstep.

5. What materials can be used to make RC parts with a 3D printer?

A wide range of materials can be used to make RC parts with a 3D printer, including plastic, metal, and composite materials. The choice of material will depend on the specific requirements of the parts, including strength, durability, and resistance to wear and tear.

6. Can RC parts made with a 3D printer be used in commercial or professional applications?

Yes, RC parts made with a 3D printer can be used in commercial and professional applications. With the ability to create high-quality, detailed parts customized to meet specific requirements, 3D printing has become an increasingly popular choice for creating RC parts in professional and commercial settings.

However, it is important to carefully evaluate the quality and performance of the parts you create to ensure they meet the necessary safety and performance standards for commercial or professional use.